Home / Water Hardness / North Dakota
Water Hardness · rank #26 of 51 · July 2026

Water hardness in North Dakota

North Dakota averages 130 PPM — "hard" on the USGS scale and 8% harder than the national average of 120 PPM (rank #26 of 51, 1 = softest). Expect visible scale and spotting; a softener starts paying for itself in appliance life at this level.

Average hardness130 PPM +8% vs US avg
U.S. average (average hardness)120 PPM
North Dakota vs U.S. average+10 PPM
USGS classificationhard
Grains per gallon7.6 GPG
Hardness rank (1 = softest)#26 / 51
Not sure what's coming out of your North Dakota tap?

State averages hide huge local swings. A certified home water test kit tells you your exact hardness and what's dissolved in your water — before you spend a dollar on treatment.

Test your water at home

We may earn a commission if you request quotes through this link. It costs you nothing and never affects the data we publish.

How North Dakota compares with its neighbors

Crossing a state line changes your costs more than almost any other single factor. Here's North Dakota next to nearby states:

StateHardness (PPM)Difference vs ND
North Dakota130 PPM
Minnesota175 PPM+45 PPM
South Dakota150 PPM+20 PPM
Montana95 PPM35 PPM

North Dakota water hardness FAQ

How hard is the water in North Dakota?

North Dakota's water averages 130 PPM (7.6 grains per gallon) — "hard" on the USGS scale, ranking #26 of 51 states where #1 is the softest water. Local levels vary with your utility's source; your annual Consumer Confidence Report or a home test kit gives your exact number.

Is hard water bad for my health?

No — hardness minerals (calcium and magnesium) are not a health risk, and hard water can even contribute a small amount of dietary minerals. The damage is financial: scale clogs water heaters, dishwashers and fixtures, cuts appliance efficiency, and leaves film on dishes and skin. Health concerns come from contaminants, not hardness — see our tap water quality data.

Do I need a water softener in North Dakota?

Probably worth it. At 130 PPM ("hard"), most households see enough scale and spotting that a softener ($1,000–$2,500 installed per Angi's 2026 data) is a reasonable investment, especially with a tank water heater.

What does hard water do to appliances?

Scale from hard water shortens the life of anything that heats water and cuts water-heater efficiency. In North Dakota at 7.6 GPG, an unprotected tank water heater accumulates scale quickly — flushing it yearly is essential, and a softener extends its life by years.

Not sure what's coming out of your North Dakota tap?

State averages hide huge local swings. A certified home water test kit tells you your exact hardness and what's dissolved in your water — before you spend a dollar on treatment.

Test your water at home

We may earn a commission if you request quotes through this link. It costs you nothing and never affects the data we publish.